Tile-Joint Grout

Tile joint (Grouts) fillers are used in the space between adjoining tiles laid either on the floor or walls. Traditionally, tiling is done by placing tiles close with white cement used to fill the tile joints instead of tile joint fillers. White cement tends to break easily, leading to dirty/ stained tile joints, water seepage, and the growth of fungus/ bacteria.
To overcome these problems, Tile Grout provides stain-free tile joints, is acid/ chemical resistant, non-cracking or powdering, anti-fungal & anti-bacterial.

Advantages -

Easy to apply
Stainfree tile joints (Grouts)
Non-cracking or powdering
Anti-fungal & anti-bacterial
Available in a range of 40 colors to suit your tile color
Acid/ chemical resistant (epoxy-based grouts only)

When applying grout, it is important to ensure that the gaps between the tiles are clean and free of any debris. The grout is then mixed according to the manufacturer’s instructions and applied to the gaps using a rubber float. Once the grout has been applied, excess grout is removed from the surface of the tiles using a damp sponge.

After the grout has dried, the tiles can be polished with a dry cloth to remove any remaining haze. It is important to avoid walking on the tiles or exposing them to water for at least 24 hours after the grout has been applied to allow it to fully cure.

Types of Tile Joint Grout

1. Polymer-modified grout for wall & floor tile joints

Suitable for joint width of 1-6/mm
Available in a range of colors
Dry areas, Toilets, Bathrooms, and Swimming pools (to be used with ADMIX GT1)
Conforms to overall Migration Test specifications as per USFDA-175.300, certified by CFTRI

2. Polymer-modified grout for wall & floor tile joints

Suitable for joint width of 1-6/mm
Available in a range of colors
Dry areas, Toilets, Bathrooms, and Swimming pools (to be used with ADMIX GT1)
Conforms to overall Migration Test specifications as per USFDA-175.300, certified by CFTRI

3. Polymer-modified grout for wide joints

Suitable for joint width of 3-12 mm
Available in Grey & white
Dry Areas, Terraces, Podiums, Walls & Floors, Interiors & Exteriors, Commercial Spaces

4. Polymer-modified grout for wall & floor tile joints

Suitable for joint width of 1 – 12mm
Available in a range of colors
Dry areas, Toilets, Bathrooms, Swimming pools, Commercial spaces, Hygienic & Sterile areas, Chemical resistance areas
Conforms to the Global Migration Test laid by USFDA -17.300 for the intended use for contact with aqueous food & beverage (water-based) products.
Exceeds EN 13888 standards

5. High-performance epoxy grout with a Sparkling effect